Setup Two-step Provisioning

Two-step provisioning adds the new customer sub domain in a partial automation process where during the Onboarding wizard run, the customer is prompted to generate the TXT and A‑Record. Once created, the script creates the sub domain and adds it under the Custom domains on Azure. This method requires the creation of a sub domain on the DNS hosting platform which must be then be configured on the UMP-365 Main Tenant interface in the DNS sub domain Mapping table.

➢

Do the following:

1.

Open the customer DNS hosting platform and choose the desired sub domain.

2.

Note the details of the domain.

3.

In the UMP Main Tenant Navigation pane, open the DNS API Configuration screen (System > DNS API Configuration).

4.

On the right side of the screen, click Add to create a new DNS subdomain for the customer with the following values:

●

Desired region name, for example APAC or EMEA.

●

The domain name which may represent a specific region for a customer. For example, in the screen below, the domain for activecommunications.eu has three subdomains defined, one for region EMEA which is represented by ea.activecommunications.eu, one for the APAC region with pa.activecommunications.eu and a test region DEMOBRAD with qa.activecommunications.eu.

●

IP address of the SBC device used to manage SBC calls in the region.

Parameter	Description
Name	The name of the managed SBC device.
SBCID	The ID of the SBC device.
FQDN	The FQDN of the SBC device.
IP Address	The IP address of the SBC device.

Once the above configuration has been completed, the Onboarding wizard can be used to provision the DNS sub domains using the Two-step method (see Two-step DNS Provisioning).